 Shuttle USB Driver Set Ver 1.05
-------------------------------

OneTime Installation Requirements:-

1. If any previous version of Shuttle MSD Enumerator was running,
 1.1 Use device manager to remove it from system.
 1.2 Delete the slmsdenm.vxd from WINDIR\SYSTEM directory.
 1.3 Reboot is mandatory to remove enumerator from system.
 1.4 Delete any previous SHTLEUSB.INF files 
   (so that enumerator gets copied to system)

2. Delete the registry key "\HKLM\Enum\SHTLMSD" branch

3. Just plug the eUSB Cable

4. You will be prompted for USB Client Driver

5. Once the client driver loads, it will load the MSD Enumerator

6. Once the enumerator loads, it will first create a devnode for
itself at key "HKLM\Enum\SHTLMSD\*PNPSLMSDENUM\0000"

7. Hereafter, it will proceed normally as like earlier versions.

8. Enumerator will load the MPD and the drive letter appears

9. During unload, Enumerator will stay in memory

10. Replugging of the eUSB cable will work in the normal way as
loading of already loaded vxd does not harm the system.