Windows 8/8.1 and Server 2012 driver installation for the NewerTech MAXPower eSATA 6G PCIe 2.0 Controller Card with Asmedia 1061 chipset

1) Determine if your computer is running a 32-bit or 64-bit version of Windows.  You can do this by: 
	a) Pressing Windows-X and selecting "File Explorer";
	b) Right-clicking on "This PC" and selecting "Properties";
	c) Looking under System --> System Type.  It will either say "64-bit Operating System" or "32-bit Operating System".
2) Install the driver.
	a) For 64-bit systems, open the "x64" folder, right-click on "asachi64" Setup Information file and select "Install".
	b) For 32-bit systems, open the "x86" folder, right-click on "asachi32" Setup Information file and select "Install".
3) Shut down your computer.
4) Install the NewerTech MAXPower eSATA 6G PCIe 2.0 Controller Card.
5) Power on your computer.
6) Verify installation was successfull by:
	a) Pressing Windows-X and selecting "File Explorer";
	b) Right-clicking on "This PC" and selecting "Properties";
	c) Selecting "Device Manager";
	d) Looking for "Asmedia 106x SATA Controller" under the "IDE ATA/ATAPI controllers" section.  There will be two listings for the "Asmedia 106x SATA Controller", one for each eSATA port.